In questo sito vengono utilizzati i cookies, anche di terze parti. Procedendo nella navigazione accetti.


Advanced search

IDC AMPMODU

MRSP IDC AMPMODU
zoom Zoom image
MRSP IDC AMPMODU MRSP IDC AMPMODU AMPMODU Tandem-Spring MT Loader

Description

 

Technical Specifications

The applicator Restyling IDC Pneumatic is an economical solution for crimping Insulation Displacement Connectors. In this configuration, the product is specific to the connector of the family Tandem Spring AMPMODU MT. Applicable to all presses with standard attacks and working height equal to 135.8mm (available on request different working heights).

The connectors are loaded manually on a special loader steel which guarantees the position and the polarization of the connector itself and the position of the pin inserted board. The pneumatic feed is controlled by a series of sensors that allow you to crimp the pins, step by step, regardless of the number of routes, and perform a translation with different pitch at the end of each complete set of crimping. A sensor controls the positioning of the optical cable to crimp. The cable entry is via a dedicated pin in the clamping gripper.

 
  ID
MRSP – IDC AMPMODU  
  CRIMPING HEIGHT
135,8mm (5,346")  
  STROKE
40/30mm (1,575/1,18")  
  TERMINAL PITCH
2,5mm. Connectors mounted  
on a mechanical loader  
  WIRE SECTION
from 0.3 to 0.6 mm²  
  FEEDING SYSTEM
Air pipe D6  
pressure 5/6 Bar  
  WEIGHT
8,0 Kg (17,6 lb)  
  DIMENSIONS
W638xH145,5xD152(mm)  
(W25,1“xH5,72”xD5,98”)  
  AIR CONSUMPTION
0,36 dm³/min  
  CYCLE TIME
1,8 sec  

  LOADING TIME
  2X3 PIN CONNECTORS

100 sec. (N°27 connettors)  
  LOADER
Customized according to the  
connector ways number.  
No adjustment needed  
on the applicator  

 

Copyright MAXXmarketing Webdesigner GmbH
Mecal's YouTube Channel Mecal's YouTube Channel